欢迎光临潍坊市正邦重工机械有限公司!Welcome to Weifang Zhengbang Heavy Industry Machinery Co., Ltd!
热门关键词Hot Keywords:洗沙机/sand washing machine,洗沙设备/sand washing equipment,广东洗砂机/Guangdong sand washing machine,洗砂机/sand washing machine
高级搜索:

解决洗石机磨损严重的有效措施/Effective measures to solve the serious abrasion of washing machine

来源: 时间:2018-09-21 11:49:29 次数:

洗石机在工作的时候要先进行注水,然后再加入砂石进行加工,这样反反复复长时间的砂石清洗进程,造成主轴和叶轮的磨损严重。When the washing machine is working, water should be injected first, and then sand should be added for processing. In this way, the long-term sand washing process will be repeated, resulting in serious wear of the main shaft and impeller. I

洗石机在工作的时候要先进行注水,然后再加入砂石进行加工,这样反反复复长时间的砂石清洗进程,造成主轴和叶轮的磨损严重。再加上一些荷载的不断变化,最终导致摩擦条件不稳定从而造成零件磨损。而零件的磨损直接跟润滑作用有关。因此,在使用洗石机工作过程中用户必须合理选择较为适合的润滑材料以及润滑系统,保证洗石机在工作过程中零部件能得到充足的润滑作用。可以有效降低洗石机的摩擦系数。通常情况下,我们采取在摩擦表面建立液体摩擦的方式,这也是最有效的措施之一。


其次,洗石机磨损严重的原因还有可能是因为滑动轴承受损的问题,主要存在两种可能:一种是轴承因为承受局部磨损而产生不均匀变形,另一种就是承受相对均匀的磨损最终导致轴承和轴颈之间的间隙不断增大。因为一般情况下轴的耐磨性要比轴承材料高出许多,因此轴承磨损的速度也比较块,所以操作员在操作过程中要多注意操作的一些细节,这样才能保障洗石机的正常运行。延伸洗石机的运用寿命。

When the washing machine is working, water should be injected first, and then sand should be added for processing. In this way, the long-term sand washing process will be repeated, resulting in serious wear of the main shaft and impeller. In addition, the constant changes of some loads will eventually lead to the instability of friction conditions and wear of parts. The wear of parts is directly related to lubrication. Therefore, in the process of using the washing machine, the user must reasonably select the appropriate lubricating materials and lubricating system to ensure that the parts of the washing machine can get sufficient lubrication during the working process. It can effectively reduce the friction coefficient of the washing machine. Usually, we take the way of establishing liquid friction on the friction surface, which is also one of the most effective measures.
Secondly, the serious wear of the washing machine may also be due to the damage of the sliding bearing. There are two main possibilities: one is the uneven deformation of the bearing due to bearing local wear, the other is the relatively uniform wear which eventually leads to the increasing gap between the bearing and the journal. Generally, the wear resistance of the shaft is much higher than that of the bearing material, so the speed of bearing wear is also relatively large, so the operator should pay more attention to some details of operation in the operation process, so as to ensure the normal operation of the stone washing machine. Extend the service life of the washing machine.